Luneau Technology Briot perception2 - Configuration of General Operating Parameters; Principle; Screen Description; Access; Exit

Configuration...Configuration of general operating parameters
4-87
LTO
4.4 CONFIGURATION OF GENERAL OPERATING PARAMETERS
4.4.1 PRESENTATION
4.4.1.1 PRINCIPLE
 You define the machine's general operating mode.
4.4.1.2 SCREEN DESCRIPTION
The setting screen for the machine's general operating parameters is shown below:
Screen 4-5: Setting the machine's general operating parameters
4.4.1.3 ACCESS / EXIT
4.4.1.3.1 TO ACCESS THE SCREEN
4.4.1.3.2 TO EXIT THE SCREEN
To save the
settings
You are in the
General
Operation screen 
of the machine
Dialog language.
Press again 
until the language 
of your choice is displayed
Compensation of
dimensions as a
function of the
fouling of the wheels
Compensation of
dimensions as a
function of bowing/
flattening of the
frame
Dual job 
function
Compensation of
dimensions as a
function of the
temperature of
water
Select the OMA version
Choice of LRP (linked to the OMA server)
Measurement of
lens size
Entered
configuration of
the pupillary
height
3D correction of
the pupillary
distance
Keyboard
type
(AZERTY/
QWERTY)
x 3