LTO
GRAPHIC CODES
Different graphic codes have been used in this manual to allow the user to distinguish between different types of
information and easily spot the items which demand special attention (e.g. safety-related items).
The table below lists all the codes and describes them:
TABLE 1: DESCRIPTION OF THE PICTOGRAMS
Graphic
code
Description
Vital warning.
Risk of human injury or material damage and machine malfunction.
Follow the instructions carefully.
Vital recommendation.
Risk of machine damage or malfunction.
Follow the instructions carefully.
Vital preliminary action
Before undertaking any action, check that the machine is disconnected.
Electrical hazard.
Heavy component.
In particular, a second person is necessary to carry and move the machine.
Rotating component.
In particular, do not put your hands near the wheel unit.
Attaching component.
In particular, beware of the clamping shafts closing.
Protective gloves must be worn.
Especially for cleaning and changing the tanks.
Protective goggles must be worn.
Especially for cleaning and changing the tanks.
Overalls must be worn.
Especially for cleaning and changing the tanks.
To Next Page
Loading...
