Lust CDA3000 - Page 11

Application Manual CDA3000
DE
EN
FR
5.3 Protection and information ...................................5-53
5.3.1 _30 OL-Frequency limitation ..............................5-53
5.3.2 _33 MO-Motor protection ..................................5-55
5.3.3 Device protection ...............................................5-63
5.3.4 _34 PF-Power failure bridging ...........................5-65
5.3.5 _36 KP-K
EYPAD ..................................................5-71
5.3.6 _38TX-Device capacity utilization ......................5-74
5.3.7 _39DD-Device data ...........................................5-77
5.3.8 _VAL-Actual values ............................................5-79
5.3.9 _50 WA-Warning messages ...............................5-82
5.3.10 _51ER-Error messages ......................................5-85
5.4 Bus operation and option modules ......................5-90
5.4.1 _55 LB-L
USTBUS .................................................5-90
5.4.2 _57 OP-Option modules .....................................5-93
5.5 Open-loop and closed-loop control ......................5-96
5.5.1 _31 MB-Motor holding brake .............................5-96
5.5.2 _32 MP-MOP function .......................................5-99
5.5.3 _59 DP-Driving profile generator ......................5-102
5.5.4 _27 FF-Fixed frequencies ................................5-107
5.5.5 _60 TB-Driving sets .........................................5-109
5.5.6 _65 CS-Characteristic data switchover (CDS) ...5-112
5.5.7 _66 MS-Master/-Slave operation .....................5-114
5.5.8 _67 BR-DC braking ..........................................5-117
5.5.9 _68 HO-DC holding ..........................................5-120
5.5.10 _80 CC-Current controller ................................5-122
5.5.11 _64CA-Current-controlled startup ....................5-124
5.5.12 _69 PM-Modulation .........................................5-129
5.5.13 _84 MD-Motor data .........................................5-132
5.5.14 _77 MP-Remagnetization ................................5-134
5.5.15 _86SY-System .................................................5-136
6 Control modes
6.1 Voltage Frequency Control (VFC) ............................6-6
6.1.1 _70VF-Voltage Frequency Control ........................6-8
6.1.2 _74 IR-IxR load compensation ...........................6-13
6.1.3 _75 SL-Slip compensation .................................6-16
6.1.4 _76 CI-Current injection .....................................6-18
6.1.5 Tips and optimization aids for control engineers .6-21