Lust CDA3000 - Page 117

Application Manual CDA3000
5-3
1
2
3
4
5
6
A
DE
EN
FR
“KP/DM” and “BUS” columns
The abbreviations “KP/DM” represent the settings made in the DRIVE-
M
ANAGER and the KEYPAD KP200. “BUS” represents the setting as a digit
for bus operation.
Types of parameters
The software of the inverter module differentiates between different types
of parameters which are marked by symbols in the parameter editor of
the D
RIVEMANAGER:
• Parameters dependent on the existing hardware.
− These are automatically detected by the inverter
module and their parameters set accordingly.
• Parameters dependent on the specific application.
− These must be entered accordingly by the user.
− In the parameter editor of the D
RIVEMANAGER
editable parameters are identified by this symbol.