Lust CDA3000 - Page 337

Application Manual CDA3000
A-21
Appendix B Error messages
1
2
3
4
5
6
A
DE
EN
FR
Youcanreachus:
Mon.-Thur.: 8 a.m. - 5 p.m. Tel. 06441/966-136, Fax -211
Fri.: 8 a.m. - 4 p.m. Tel. 06441/966-136, Fax -211
e-mail: service@lust-tec.de
User errors in KEYPAD OPERATION
Error Cause Remedy
ATT1 Parameter cannot be changed at current
user level or is not editable.
Select user level 1-MODE higher.
ATT2 Motor must not be controlled via the CTRL
menu.
Cancel start signal from a differ-
ent control location.
ATT3 Motor must not be controlled via the CTRL
menu because of error state.
Reset error.
ATT4 New parameter value impermissible Change value.
ATT5 New parameter value too high Reduce value.
ATT6 New parameter value too low Increase value.
ATT7 Card must not be read in current state. Reset start signal.
ERROR Invalid password Enter correct password.
Ta ble A .4 K
EYPAD user error: Reset with Start/Enter