262335 84 Revision A
22. Shut down the engine, and remove the key from the ignition.
23. Check the float as follows:
a. Grasp one end of the draper header and lift it. The lifting force should be 335–380 N (75–85 lbf) (with stabilizer/
transport wheels raised, if they are equipped).
b. Repeat this step on the other side of the header.
24. Proceed to 3.19 Connecting A40DX Auger Header Hydraulic and Electrical Systems, page 85.
ASSEMBLING THE MACHINE
To Next Page
Loading...
