214327 264 Revision B
Problem Solution Refer to
Symptom: Crop is Thrown Across Opening and under Opposite Side Draper
Drapers running too fast in light crop Reduce draper speed 3.7.8 Draper Speed, page 59
Symptom: Material Accumulates inside or under Front Edge of Draper
Deck height improperly adjusted Adjust deck height 5.7.5 Adjusting Deck Height, page 186
Symptom: Material Wrapping at Upper Cross Auger Beater Bars
NOTE:
Some newer upper cross augers do not have beater bars.
Crop conditions do not require
beater bars
Remove beater bars
3.14.1 Removing Beater Bars, page 93
Symptom: Material Accumulating on End Deflectors and Releasing in Bunches
End deflectors too wide
For headers with manual deck shift
only, trim deflector or replace with
narrow deflector (MD #172381)
3.13 Unplugging Cutterbar, page 92
TROUBLESHOOTING
To Next Page
Loading...
