REPAIR INSTRUCTIONS, PART 1
Page 107
24. Attach the engine lifting tool, J 47038, to the
engine. Secure the engine lifting tool to the
front of the fan bracket and to the rear at the
flywheel housing.
Ensure all bolts and pins are correctly
positioned prior to removing the engine from
the chassis. Failure to properly install all bolts
and pins of the engine lifting tool can result in
personal injury or death.
106
Figure 106 — Attaching the Engine Lifting Tool to the
Engine
25. Remove the bolts that secure the front
engine support to the frame crossmember.
While removing the engine, watch for
obstructions that may interfere, such as engine
and chassis components, brackets, clamps and
other parts still attached to the engine. Failure to
heed this caution may result in severe damage to
the engine and other components.
26. Using the lifting device and the aid of a
helper, remove the engine from the vehicle.
27. Refer to Engine Disassembly procedures for
mounting the engine on an engine stand.
To Next Page
Loading...
