Page 124
REPAIR INSTRUCTIONS, PART 1
132
Figure 132 — EGR Hot Pipe Removal
3. Remove and discard the seals at each end
of the hot pipe.
EGR Valve Removal
[214 QE]
1. Disconnect the wiring harness lead from the
EGR valve, if not already done.
2. Remove the fasteners securing the EGR
valve heat shield and remove the shield.
133
Figure 133 — EGR Valve Heat Shied
3. Loosen the EGR valve oil return line.
134
Figure 134 — Loosening EGR Valve Oil Return Line
4. Loosen the EGR valve oil supply line.
135
Figure 135 — Loosening EGR Valve Oil Supply Line
To Next Page
Loading...
