Page 136
REPAIR INSTRUCTIONS, PART 1
Tandem Pump (Fuel and Power
Steering) Removal
164
Figure 164 — Tandem Pump (Fuel and Power Steering)
Use suitable rags and containers for collecting oil
and fuel drainage.
Be sure to capture the banjo sealing washers and
hollow screws while removing them.
1. If not already done, remove the power
steering oil supply and return lines from the
tandem pump and set aside.
2. If not already done, remove the fuel supply
and return lines from the fuel pump and set
aside.
3. Remove the fasteners securing the tandem
pump assembly to the flywheel housing and
remove the tandem pump.
Air Compressor Removal
[261 CK]
165
Figure 165 — Air Compressor and Fittings
1. Lubrication Line
2. Banjo Fitting
3. Coolant Lines
4. Attaching Stud and Nut
5. Air Compressor
To Next Page
Loading...
