Page 134
REPAIR INSTRUCTIONS, PART 1
2. Remove the screws securing the filter
housing to the cylinder block and remove the
housing.
157
Figure 157 — Fuel Filter Valve Housing
3. Remove the screws securing the AFI
shut-off valve to the left side of the cylinder
block and remove the valve.
158
Figure 158 — AFI Shut-Off Valve
EECU and Cooling Plate Removal
If not already removed, follow this procedure.
159
Figure 159 — EECU and Cooling Plate
1. EECU
2. Module Mounting Screws
3. Cooling Plate Mounting Screws
4. Cooling Plate
5. Cylinder Block
6. Ground Strap
To Next Page
Loading...
