REPAIR INSTRUCTIONS, PART 1
Page 231
EGR Crossover (Cooler Outlet) Pipe
Installation
[214 HN, HP, HR]
325
Figure 325 — EGR Crossover Pipe Installation
The EGR crossover pipe must be installed before
the fan mounting bracket.
326
Figure 326 — EGR Crossover Pipe Elastomer Bushing
1. Push the elastomer bushings onto the
projections of the crossover pipe.
2. Align the pipe projections with the holes in
the cylinder block and push the pipe into
place.
Fan Bracket Installation
[215 HA]
327
Figure 327 — Fan Bracket Assembly
1. Assemble the fan bracket on the cylinder
block.
2. Using a torque wrench, tighten the screws
according to specification.
1. EGR Crossover Pipe 2. Elastomer Bushings
1. Hex-Head Screws
2. Socket-Head Screws
3. Crossover Pipe
4. Fan Bracket
To Next Page
Loading...
