Page 300
SPECIFICATIONS
MP7 ENGINE MECHANICAL SPECIFICATIONS
Material and Dimensional Data
GENERAL DATA, WEIGHTS AND DIMENSIONS
Item Specification
Engine Type In-line, direct injection, diesel
Number of Cylinders 6
Displacement 11 L
Bore and Stroke 123 x 152 mm (4.84 x 5.98 in.)
Compression Ratio 16:1
Emissions Level EPA 07 (0.20 g NOx, 0.01 g PM, 0.14 g NMHC per bhp/hr
using 15 ppm Ultra Low Sulfur Fuel)
Fuel System Electronic Controlled Unit Injector
Valve Actuation Single Overhead Cam, 4 valves per cylinder
Aspiration Variable Geometry Turbocharger with sliding nozzle ring
Power Cylinder Wet liner; one-piece steel pistons
Electronic Controls V-MAC IV
Emission Control Cooled EGR and catalytic Diesel Particulate Filters
Peak Power Ratings 242–302 kW (325–405 hp)
Peak Torque Ratings 1708–2115 N•m (1260–1560 lb-ft)
Engine Families and Operating Ranges Econodyne 1200–1800 rpm
MaxiCruise 1200–1950 rpm
Maxidyne 1200–2100 rpm
Weight, Dry 1034 kg (2280 lb.)
Firing Order 1–5–3–6–2–4
Length Overall 1364 mm (53.7 in.)
Width Overall 810 mm (31.9 in.)
Height Overall 1113 mm (43.8 in.)
To Next Page
Loading...
