Page 26
DESCRIPTION AND OPERATION
OIL PAN
The oil pan is steel with a threaded plug for
draining. The pan has a groove in the mounting
flange which accepts a molded elastomer gasket
for a seal. Eighteen spring-loaded screws clamp
the pan to the cylinder block.
14
Figure 14 — Oil Pan and Gasket
The oil pan includes an oil level and temperature
sensor with connector. The filler tube and dipstick
mounting ports are also components of the oil
pan.
The oil pan can be installed with the sump at the
front or at the rear to accommodate chassis
model (axle forward vs. axle back).
1. Metal Tabs (Front of
Engine)
2. Single Tab (Left Rear of
Engine)
To Next Page
Loading...
