Section 2 – SAFETY PRECAUTIONS Mini-Crawler Crane M A E D A
2-8 9/2020 MC285CB-3
The safety messages that follow have NOTICE
level hazards.
Any part which is found defective as a result of
inspection or any part whose measured value
does not satisfy the standard or limit must be
replaced.
Always tighten components to the specified
torque. Loose parts can cause equipment
damage or cause it to operate improperly.
Only use replacement parts specified. Other
replacement parts may affect warranty coverage.
Follow the guidelines of the
governmental agencies for the proper
disposal of hazardous materials such
as oil. Consult the local authorities or
reclamation facility.
Clean all accumulated dirt and debris away from
the body of the machine and its components
before you inspect the machine or perform
preventive maintenance procedures or repairs.
Operating a machine with accumulated dirt and
debris will cause premature wear of machine
components. Accumulated dirt and debris also
hinders effective machine inspection.
Retrieve any tools or parts that may have dropped
inside of the machine to avoid improper machine
operation.
Never dispose of hazardous materials by dumping
them into a sewer, on the ground, or into
groundwater or waterways.
If any alert indicator illuminates during machine
operation, stop the machine immediately.
Determine the cause and repair the problem
before continuing to operate the machine. Check
the following specifications and items before using
this machine:
・Maintenance inspection records for completion
of periodic inspections and service
・Crane capacity
・Crane maintenance condition
・Problems or failures unique to the crane
・Operating condition of the brakes, clutch and
other operating controls
・Condition and operation of lighting, including
rotating lights
・Condition and operation of hook, winches,
boom, outriggers and related components
To Next Page
Loading...
