Maeda MC285CB-3 - Page 79

M A E D A Mini-Crawler Crane Section 4 – MONITOR
9/2020 MC285CB-3 4-19
Consumables Display
Lists consumables and indicates the time until
the next scheduled replacement.
Fig. 4-35
For more information on consumables list, see
“CONSUMABLES” on 5-6.
5BIf a consumable has been replaced, use the ▲
or ▼ adjuster switches (2-5A) to select the
consumable replaced. Once a consumable has
been selected, hold down the replacement
switch (2-5B) to update the replacement time.
Updating increments the number of
replacements by 1 and resets the time
remaining.
Fig. 4-36
If “Always” or “At start” is selected for the
consumable icon display selection (2-5C),
yellow text and a white icon will appear on the
Home screen if the remaining time is 30 h or 3
days, while red text and a red icon will appear on
the Home screen when the remaining time is 0 h
or 0 days.
Replace consumable promptly. Continued use
past the recommended replacement date may
be dangerous and harm the machine.
NOTICE: We recommend setting the
consumable icon display selection (2-5C) to
“Always.”
Always: Consumable icons are constantly
displayed on the Home screen if the
replacement time is approaching or has been
exceeded.
At start: Consumable icons are displayed only
for 30 seconds after displaying the Home screen
if the replacement time is approaching or has
been exceeded.
No: Consumable icons are not displayed on the
Home screen, even if the replacement time is
approaching or has been exceeded.
Monitor Brightness Adjustment
The monitor brightness can be adjusted.
Make adjustments with ◄ or ► of adjustment
switch(2-6A).
Fig. 4-37