Manitowoc 16000 - Page 143

Reference Only
Manitowoc Published 05-09-17, Control # 011-29_v2 4-5
16000 OPERATOR MANUAL SET-UP AND INSTALLATION
4
Table 4-2
Operating Limitations
See Liftcrane Mast Capacities Chart at the end of this section for detailed lifting capacities.
Crane Configuration Swing Max Capacity Max Radius
• Crane on carbody jacks (rotating bed, adapter frame,
and carbody)
• Live mast raised or lowered (NOTE 1)
• No assembly block
• No crawlers
• No counterweight
NO!
• Crane on carbody jacks (rotating bed, adapter frame,
and carbody)
• Live mast in operating range (see Figure 4-9
).
• Assembly block installed (NOTE 2)
• No crawlers installed (handling 1st crawler)
• No counterweight
10° Either Side of Center
See Figure 4-10
, View E
75,000 lb
(34 019 kg)
20 ft
(6,1 m)
• Crane on carbody jacks (rotating bed, adapter frame,
and carbody)
• Installing crawlers with mast
• No counterweight
2nd Crawler Must be Lifted
Over Opposite Side of 1st
Crawler.
• Crane on crawlers
• Counterweight installed or removed
• Handling loads with live mast
360°
NOTE 1 Maximum mast angle = 156°
NOTE 2 Chain sling and 3-part line required
FIGURE 4-2
45 in (1 143 mm)
Maximum Deck Height
Rotating Bed/Adaptor/Carbody
Length 43 ft, 6 in (13,26 m)
Width 9 ft, 10 in (3,00 m)
Height 10 ft, 6 in (3,20 m)
Weight 143,260 lb (64 982 kg)
4-2