Maintenance work on the carrier
7.4 Fuel system
7 - 38 3 302 574 en Maintenance manual
GMK3060
03.11.2017
Bleeding the
fuel line
If necessary, the fuel line can be bled via the bleed screw on the head of
filter 2.
At filter 2
• Open the screw (2) on the head of filter 2.
At filter 1
• Actuate the pump (1) until the fluid flowing
out of the drain plug (2) no longer contains
any bubbles.
• Close the drain plug (2).
• Remove the receptacle.
• Lower the driver's cab; à p. 7 - 3.
• Start the engine and check for leaks.
H
If you have used a clean receptacle, you can refill the fuel tank with the
consumable using a filter.
Otherwise dispose of the consumable properly.
To Next Page
Loading...
Need help?
General
