Maintenance work on the carrier
7.4 Fuel system
03.11.2017
Maintenance manual 3 302 574 en 7 - 37
GMK3060
7.4.3 Replacing fuel filter 2
Spare parts
and tools
– Receptacle, approx. 5 l (1.5 gal);
à p. 2 - 4.
Prerequisites – The truck crane must be level;
à Operating Instructions.
– The driver's cab is tipped;
à p. 7 - 3.
– The engine must not be running and must be secured against unauthor-
ised use;
à p. 2 - 3.
Changing filter 2 Filter 2 is mounted on the left side of the engine.
• Place a receptacle under the filter (1).
• Remove the filter (1).
• Let the consumable drain into the
receptacle.
• Fill a new filter (1) with clean consumable
and screw it up (lightly grease the gasket).
s
Designation Quantity GROVE part no.
Filter 1 04182157
O
Risk of environmental damage due to leaking consumables!
Always let consumables drain into suitable receptacles. Wipe up any
consumables that escape.
Stor
e/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
To Next Page
Loading...
