Maintenance work on the superstructure
8.2 Symbols for maintenance work
03.11.2017
Maintenance manual 3 302 574 en 8 - 7
GMK3060
8.2 Symbols for maintenance work
CCS • Check the symbols on the CCS Start menu (Crane Control System) in the
driver's cab each day before starting work.
• The Start menu shows the most important measurements and
the Warning submenu shows all pending warning messages;
à Operating Instructions.
Warning submenu If a symbol is displayed, you must carry out the maintenance work:
Hydraulic oil filter;
à p. 8 - 35.
To Next Page
Loading...
Need help?
General
