Maintenance work on the carrier
7.12 Compressed air system
7 - 80 3 302 574 en Maintenance manual
GMK3060
03.11.2017
7.12.2 Checking for leaks
• Start up the compressed air system.
• Check for any possible leaks in the compressed air system (connections,
pipes, hose lines and valves).
If damage cannot be rectified immediately or further damage is likely:
• Notify Manitowoc Crane Care or an authorised GROVE dealer or your repair
crew.
G
Risk of accidents due to escaping compressed air!
Never tighten connections when the system is under pressure. Only change
gaskets, pipes and hose lines when the system is depressurised.