Manitowoc GROVE GMK 3060 - Replacing the Filter Cartridge of the Compressed Air Drier

Maintenance work on the carrier
7.12 Compressed air system
03.11.2017
Maintenance manual 3 302 574 en 7 - 81
GMK3060
7.12.3 Replacing the filter cartridge of the compressed
air drier
Spare parts
and tools
– Strap wrench.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspection
pit.
– The engine must not be running and must be
secured against unauthor-
ised use;
à p. 2 - 3.
Changing the filter
cartridge
• Remove the cover (4).
• Use the valve (1) to bleed all the air from the
reservoir (2).
• Replace the filter cartridge (3) using the
strap wrench (lubricate gasket slightly).
• Fasten the cover (4).
M 12
Designation Quantity GROVE part no.
Filter cartridge 1 04156032
G
Risk of injury from escaping compressed air!
If the reservoir (2) is not completely vented, the compressed air dryer will
be under pressure.
Bleed the reservoir until air no longer escapes from the valve.