Maintenance work on the carrier
7.13 Hydraulic system
7 - 98 3 302 574 en Maintenance manual
GMK3060
03.11.2017
7.13.7 Changing the hydraulic oil filter
Oil filters must be replaced when changing the oil.
In the event of a warning message in the driver's cab the symbols (1), (2),
(3) and (4) on the
CCS (Crane Control System) control unit indicate the oil
filter(s) you need to change.
In the event of a warning message in the crane cab the
symbols (1), (2), (3)
and (4) on the
CCS (Crane Control System) control unit indicate the oil filter(s)
you need to change.
• Always replace both oil filters 1 and 2 together.
Spare parts
and tools
– Receptacle, approx. 5 l (1.5 gal);
à p. 2 - 4.
– Torque wrench for 25 Nm (18.5 lbf ft).
1 Red ring Changing oil filter 1 in the carrier
2 Red ring Changing oil filter 2 in the carrier
3 Red ring Changing oil filter 3 in the superstructure
4 Red ring
(Steering)
Changing oil filter 4 in the carrier
Designation Quantity GROVE part no.
For oil filter 1:
Filter 2 03143251
For oil filter 2:
Filter 2 03143251
For oil filter 4:
Filter 1 03142357
Housing packing set 1 03326049
For oil filter 3:
Filter 1 03142356
Housing packing set 1 03326049
To Next Page
Loading...
