Maintenance overview
5.1 Maintenance intervals
03.11.2017
Maintenance manual 3 302 574 en 5 - 1
GMK3060
5 Maintenance overview
– Maintenance plans D (= daily),
– Maintenance plans W (= weekly) and
– Maintenance plans M 1 (=
once a month) to M 12 (= every 12 month
s) and
– Maintenance plans Y 2 (= every 24 month) to Y 10 (= every 120 months).
The maintenance plans are provided as tables, divided into
– Maintenance work on the carrier and
– maintenance work on the superstructure.
In the tables, cross references direct you to the sections in which the appro-
priate maintenance work is described. The cross references consist of the
chapter number and the corresponding page number, e.g.
Check the hydraulic oil level;
à p. 7 - 83.
Checking the hydraulic oil level is described in Chapter 7, the section starts
on page 7 - 83.
5.1 Maintenance intervals
The length of the maintenance interval depends on the grade of oil used and
operating conditions of the truck crane.
The next maintenance work must be carried out after
– a specified time (maintenance interval) or
– a specified number of km driven (mi) or
– a specified nu
mber of operating hours (oper. hrs.) or
–the disp
lay of a symbol on the instrument panel o
f the CCS display in the
driver's cab;
à p. 7 - 11 or
–the display of a symbol on the
CCS display in the crane cab; Ã p. 8 - 7.
s
To Next Page
Loading...
Need help?
General
