Manitowoc GROVE GMK 3060 - Checking the Sheaves; Greasing; Hook Blocks

Maintenance work on the superstructure
8.11 Hook blocks
03.11.2017
Maintenance manual 3 302 574 en 8 - 65
GMK3060
8.11 Hook blocks
8.11.1 Checking the sheaves
• Check the sheaves in the hook blocks for damage, wear, mobility and
extreme soiling.
Have damaged, worn, stiff or extremely soiled sheaves replaced by
Manitowoc Crane Care or an authorised GROVE dealer or your repair crew.
8.11.2 Greasing
• Comply also with the run-in regulations; à p. 4 - 1.
Grease, spare
parts, tools
– Grease gun from the tool set.
Prerequisites – The hook block has been reeved at least 2-fold;
à Operating Instructions.
Greasing
On the hook blocks supplied, the sheaves, crossheads and load hooks of the
axial bearings are greased.
H
The sheaves on the hook block often have no grease nipple and are
maintenance-free.
• Check all hook blocks for grease nipples. Hook blocks with grease
nipples must be serviced, hook blocks without grease nipples are
maintenance-free.
s
M 3
M 12
Lubricating
grease
Designation
to DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369