Maintenance work on the carrier
7.8 Wheels
03.11.2017
Maintenance manual 3 302 574 en 7 - 65
GMK3060
Recognising
two-piece
aluminium rims
The round-head bolts (1) are on the outer face
of the wheel rim.
The round heads must be free of cracks, and
the
bolts must be seated securely in the
bores.
Around the edge of the aluminium rim there
are impressed marks and safety instructions
which must be complied with by the specialist
workshop.
The nuts (1) are on the inner face of the
wheel rim.
The round heads must
be free of cracks and
securely seated on the bolts. The
torque must
be checked within the specialist workshop.
s
To Next Page
Loading...
Need help?
General
