Maintenance work on the carrier
7.18 Other maintenance work
7 - 132 3 302 574 en Maintenance manual
GMK3060
03.11.2017
Spraying
• Spray the corrosion protection agent on
the underside of the carrier using a spray
extension.
• Clean surfaces sprayed by accident
immediately with water.
• Let the corrosion protection dry for one
hour.
• Check that a transparent waxy protective
film has covered the entire surface.
G
Risk of injury to the eyes!
While working with the spray extension you could be hit by the spray jet or
spray droplets. Wear protective goggles, protective clothing and gloves.
To Next Page
Loading...
