Additional page 3 302 704 en 1
GMK truck cranes
11.01.2018
Depending on the type of truck crane, a slewing angle sensor of type (A) or
(B) can be installed on the slewing bearing.
Version (A)
For this version, the specifications in the supplied
maintenance manual apply.
Version (B)
Deviating from the specifications in the
maintenance manual supplied,
this version of the slewing angle sensor is maintenance-free.
Only use the telephone number 04160234 if in need of spare parts.
Slewing angle sensor
Version (A) and (B)
To Next Page
Loading...
