Manitowoc GROVE GMK 3060 - Page 48

Maintenance overview
5.2 Maintenance plans
5 - 14 3 302 574 en Maintenance manual
GMK3060
03.11.2017
5.2.6 Maintenance plan M 12
M 12
Maintenance work on the CARRIER:
every 12 months / after 20,000 - 25,000 km (12,430 - 15,530 mi)
Engine
–Notes;
à Engine manufacturer’s documentation à p. 7 - 15
– Have the radiator checked/cleaned
à p. 7 - 26
Exhaust system with exhaust emission control
– Having the AdBlue system checked
à p. 7 - 43
– Having the soot particle filter system checked
à p. 7 - 44
Transmission
– Check the oil level
à p. 7 - 47
Axle lines
– Axle centre drives – changing the oil
à p. 7 - 53
– Final drives - Changing the oil
à p. 7 - 56
Suspension
– Pressure accumulator – checking the gas pressure
à p. 7 - 74
Steering
– Pressure accumulator – checking the gas pressure
à p. 7 - 77
Compressed air system
– Replacing the filter cartridge of the compressed air drier
à p. 7 - 81
Hydraulic system
– Changing the ventilation filter
à p. 7 - 86
– Taking oil samples:
depending on the oil sample test results:
– Ch
anging the hydraulic oil
à p. 7 - 88
à p. 7 - 93
– Changing the hydraulic oil filter
à p. 7 - 98
Air-conditioning system
– Checking the entire air-conditioning system
à p. 7 - 114
– Check V-belt/V-belt tension
à p. 7 - 116
– Changing the pollen filter
à p. 7 - 118
Other maintenance work
– Lubricating the cab door
à p. 7 - 129
– Lubricating the connecting and socket pins
à p. 7 - 130
– Renewing the corrosion protection
à p. 7 - 131