EasyManuals Logo
Home>Manitowoc>Construction Equipment>GROVE GMK 3060

Manitowoc GROVE GMK 3060 User Manual

Manitowoc GROVE GMK 3060
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Maintenance overview
5.3 Periodic inspections
03.11.2017
Maintenance manual 3 302 574 en 5 - 19
GMK3060
5.3 Periodic inspections
Your GMK3060 truck crane has been inspected before delivery.
– Truck cranes used in Germany are inspected in accordance with the reg-
ulations of the professional trade association as d
efined by BGV D 52
(BGV D 6).
– Truck cranes that are to be used abroad are inspected in accordance with
the
regulations of the respective country. If
such regulations do not exist,
they are inspected in accordance with the regulations of the professional
trade association as defined by BGV D 52 (BGV D 6).
According to German regulations, an inspection must be carried out once a
year. The regulations in other coun
tries may prescribe different inspection
intervals. If such regulations do not exist, an inspection should be carried
out by an
expert at least once a year.
These periodic inspections are generally visual examinations intended to
assess the condition of the truck crane and its components. Their purpose
is to detect defects at an early stage
and thus prevent accidents.
Inspections must be carried out on the following, if they are not already
included in the list of periodic maintenance work:
– the hydraulic and electrical control and safety devices,
– the rated capacity limiter (RCL),
– the fastening and safety devices of all screwed-on parts,
– the hoist ropes,
– the load hooks (
à Load hook inspection, p. 5 - 20),
– the load-bearing structural steelwork (for tears, deformations, etc.),
including a special check of all welds.
If damage is found on the steel co
nstruction, qualified specialists must
determine
the extent of the damage using the required material examina-
tion me
thods. They should then determine what sort of repair should be
carried out.
Prior to carrying out welding work on the truck crane, observe the
à Safety instructions for welding work, p. 1 - 4.
The inspector must write a report containing the result of the annual inspec-
tion that was performed and the measures taken to repair any damage.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc GROVE GMK 3060 and is the answer not in the manual?

Manitowoc GROVE GMK 3060 Specifications

General IconGeneral
BrandManitowoc
ModelGROVE GMK 3060
CategoryConstruction Equipment
LanguageEnglish

Related product manuals