marposs P3UP - 5.4 The Process Memories; 5.5 Application Examples

Installation and User Manual
24
5.4 The Process Memories
Marposs recommends installing the memory in order to guarantee stable results when monitoring the
machining process even when working on parts without smooth surfaces (e.g. parts with keyslots) or when it
is not possible to maintain the measurement head permanently in contact with the part (e.g. reciprocating
internal applications). Refer to the specific documentation for the P3UP in order to check the type of memory
installed in the unit, if present.
For more information read the paragraphs describing how to program the memories (7.3.3 on page 85) and
the paragraph that provides a general description of how they work (7.2.6.1 on page 67).
5.5 Application examples
Figure 6: Sample applications on P3UP
Machine
logic
interface
Machine
logic
interface
Machine
logic
interface
External grinding machine
(smooth or interrupted surfaces)
Internal or reciprocating
grinding machine
(smooth or interrupted surfaces)
Surface grinding machines
(smooth or interrupted
surfaces)