marposs P3UP - 7.3.2.8 ADJ INCR Configuration; 7.3.2.9 ADJ SPED Configuration

Installation and User Manual
79
7.3.2.8 ADJ INCR
This parameter may be used to change direction of rotation of the knob used to adjust the zero adjust value
1. Press
to set-up ADJ INCR;
2. Rotate the knob until the display indicates
CCW or CW:
• CCW = rotate the knob counter-
clockwise to increase the “zero
adjust” value
•
CW = rotate the knob clockwise to
increase the “zero adjust” value
3. Press
to confirm and return to the
programming menu; or
to return to
the programming menu without confirming.
7.3.2.9 ADJ SPED
This parameter is used to change the sensitivity of the knob (useful, for example, when performing the zero
adjust of the equipment).
Press
to set ADJ SPED
Rotate the knob to display the items
fast
(default): activates the maximum knob
sensitivity
slow3/slow2/slow1
they decrease the
sensitivity of the knob.