marposs P3UP - 7.3.2.11 RET t1 and RET t2 Parameters

Installation and User Manual
81
7.3.2.11 RET t1 and RET t2 (optional)
These parameters manage the automatic search of the head at the trigger of the C0 command.
RET t1 is the time that the stylus stays on the part
after the trigger of the C0 command
Programmable parameter from 0 (default) to 5
seconds. (0= function disabled)
RET t2 is the time, after RET t1, for which the head
remains reloaded.
Programmable parameter from 0 (default) to 5
seconds. (0= function disabled)