Installation and User Manual
5
4.1 GENERAL INFORMATION 18
4.1.1 ENVIRONMENTAL CONDITIONS 18
4.1.1.1 Type of environment 18
4.1.1.2 Explosion and/or fire 18
4.1.1.3 Environment air temperature 18
4.1.1.4 Humidity 18
4.1.1.5 Altitude 18
4.1.1.6 Contaminating agents 19
4.1.1.7 Ionizing and non-ionizing radiation 19
4.1.1.8 Lighting of a 'normal' environment 19
4.1.1.9 Removing the P3UP from its packaging 19
5. GENERAL EQUIPMENT DESCRIPTION 20
5.1 PRODUCT VERSIONS 20
5.2 DESCRIPTION OF CONNECTORS 22
5.3 GENERAL TECHNICAL SPECIFICATIONS 23
5.4 THE PROCESS MEMORIES 24
5.5 APPLICATION EXAMPLES 24
6. INSTALLATION PROCEDURE 25
6.1 SECURING THE UNIT TO THE MACHINE TOOL 26
6.2 CONNECTING THE MEASUREMENT HEADS 29
6.3 I/O CONNECTION TO THE MACHINE LOGIC 30
6.3.1 I/O TYPE A – OUTPUTS WITH N.O. CONTACTS RELAYS 31
6.3.2 I/O TYPE AA – OUTPUTS WITH N.O. CONTACTS RELAYS 36
6.3.3 I/O TYPE B – 24V D.C. OPTO-ISOLATED TYPE MACHINE I/O 39
6.3.4 I/O TYPE C – OUTPUTS WITH EXCHANGED RELAYS 42
6.4 CONNECTING THE ANALOGUE OUTPUT 46
6.5 POWER SUPPLY AND EARTH CONNECTIONS 48
6.6 SWITCHING THE UNIT ON 49
6.7 MEASUREMENT HEAD MECHANICAL ZERO-SETTING 50
6.7.1 MECHANICAL ZERO-SETTING IN-PROCESS HEADS WITH ADJUSTMENT GUIDES 50
6.7.2 MECHANICAL ZERO-SETTING IN-PROCESS HEADS WITH LATCHES 53
6.7.3 FAST ZERO-SETTING UNIMAR IN-PROCESS HEADS WITH LOCKING LEVER 55
6.7.4 MECHANICAL ZERO-SETTING IN-PROCESS HEADS WITH WEMAR TYPE SUPPORT 57
6.8 CYCLOGRAMS 59
7. OPERATING AND USING THE DEVICE 60
7.1 MECHANICAL ZERO-SETTING THE INSTRUMENT 62
7.2 P3UP IN MEASUREMENT 62
7.2.1 SETTING UP THE CONTROL POINTS 62
7.2.2 TIP MODE 63
7.2.3 SELECTING THE CHANNELS 63
7.2.4 ZERO ADJUST 64
7.2.5 PULSE FEEDBACK 66
7.2.6 DESCRIPTION OF THE MEMORY FUNCTIONS 67
7.2.6.1 Damping memory 67
7.2.6.2 Programmable damping memory 67
7.2.6.3 Continuous sampling memory 68
7.2.6.4 Continuous sampling memory (blocked by I/O only) 68
To Next Page
Loading...
Need help?
General
