marposs P3UP - Product and Manufacturer Identification; Marposs Manufacturer Details; P3 UP Equipment Specifications

To Next Page

To Previous Page

Installation and User Manual

MANUFACTURER

MARPOSS S.p.A.

ADDRESS

Via Saliceto, 13 - Bentivoglio (BO) – Italy

http://www.marposs.com/www.marposs.com

TYPE OF EQUIPMENT - MODEL

P3UP (

firmware V 2.0)

FUNCTION

Measurement system for grinding machines

MANUAL CODE D2P30002GF

ORIGINAL LANGUAGE OF THESE

INSTRUCTIONS

Italian

ISSUE

11/2017

REVISION

11/2017

MARPOSS S.p.A. does not undertake any obligation of notifying possible changes to the product.

The descriptions reported in this manual do not authorise any tampering by non-authorised personnel.

The warranty on the equipment will decay if such tampering is found.

Main Page

Table of Contents5
General Information18
Environmental Conditions18
Type of Environment18
Explosion And/Or Fire18
Environment Air Temperature18
Humidity18
Altitude18
Contaminating Agents19
Ionizing and Non-Ionizing Radiation19
Lighting of a 'Normal' Environment19
Removing the P3UP from Its Packaging19
General Equipment Description20
Product Versions20
Description of Connectors22
General Technical Specifications23
The Process Memories24
Application Examples24
Installation Procedure25
Securing the Unit to the Machine Tool26
Connecting the Measurement Heads29
I/O Connection to the Machine Logic30
I/O Type a - Outputs with N.o. Contacts Relays31
I/O Type Aa - Outputs with N.o. Contacts Relays36
I/O Type B - 24V D.C. Opto-Isolated Type Machine I/O39
I/O Type C - Outputs with Exchanged Relays42
Connecting the Analogue Output46
Power Supply and Earth Connections48
Switching the Unit on49
Measurement Head Mechanical Zero-Setting50
Mechanical Zero-Setting In-Process Heads with Adjustment Guides50
Mechanical Zero-Setting In-Process Heads with Latches53
Fast Zero-Setting Unimar In-Process Heads with Locking Lever55
Mechanical Zero-Setting In-Process Heads with Wemar Type Support57
Cyclograms59
Operating and Using the Device60
Mechanical Zero-Setting the Instrument62
P3Up in Measurement62
Setting up the Control Points62
Tip Mode63
Selecting the Channels63
Zero Adjust64
Pulse Feedback66
Description of the Memory Functions67
Damping Memory67
Programmable Damping Memory67
Continuous Sampling Memory68
Continuous Sampling Memory (Blocked by I/O Only)68
Memory for Planes (with Internal Synchronisation)69
Memory for Planes (with I/O Synchronisation)69
Stock Removal Estimate Memory70
Dynamic Signal Processing (DYN LED)71
P3Up in Set-Up72
Accessing the Programming Menu (Prog)72
Setting up the Programming Parameters (P3Up In-Process)74
Ip Delay74
Controls75
C-176
TIP T1 and TIP T2 (Optional)77
Fbk Step77
Fbk Rst78
Adj Mode78
Adj Incr79
Adj Sped79
Dly Rten80
RET T1 and RET T2 (Optional)81
A M Safe82
Default83
P3Up Version83
Display84
Setting up the Programming Parameters (P3Up with Memory)85
Damping Memory85
Continuous Sampling Memory86
Memory for Planes86
Stock Removal Estimate Memory87
Closing the Program Menu88
Programming Parameters Summary Table89
Diagnostics and Maintenance93
Alarms and Warnings93
Routine Maintenance95
Cleaning the Machine95
Cleaning the Heads95
Replacing the Knob95
Extraordinary Maintenance95

marposs P3UP - Product and Manufacturer Identification; Marposs Manufacturer Details; P3 UP Equipment Specifications

Table of Contents

Related product manuals