marposs P3UP - Programming Parameters Overview

Installation and User Manual
73
It is possible to select and program the following parameters from the programming menu; see the following
paragraphs for a detailed description:
PARAMETERS PARAGRAPH
DISPLAY
see par. 7.3.2.15
IP DELAY
see par. 7.3.2.1
CONTROLS
see par. 7.3.2.2
C-1 EN see par. 7.3.2.3
C-1
see par. 7.3.2.3.1
Tip t1 – Tip t2
see par. 7.3.2.4
FBK STEP
see par.. 7.3.2.5
FBK RST
see par. 7.3.2.6
ADJ MODE
see par. 7.3.2.7
ADJ INCR see par. 7.3.2.8
DLY RTN see par. 7.3.2.10
RET t1 – RET t2
see par. 7.3.2.11
DEFAULT see par. 7.3.2.10
VERSIONE P3UP
see par. 7.3.2.14
DLY RETEN see par. 7.3.2.10
A
M SAFE
see par. 7.3.2.12
[
N.B.
If a memory card is installed, the menu contains additional programming options (see para. 7.3.3
on page 85).