marposs P3UP - Page 90

Installation and User Manual
90
MEM T *
Acquisition time memory for
planes
100 ÷ 15000
ms 15000
O O
MEM T1 **
Acquisition delay time
5 ÷
100
ms 10
O O
MEM T2 **
Acquisition time
5 ÷
1200
ms 20
O O
A

M SAFE
User is requested to confirm
Auto→Man switch
Yes/no no
O X
DEFAULT
Reset to default values
O
X
DISPLAY
Alphanumerical display
brightness
1 ÷ 7 4
O O
O
=
Modifiable
X
=
Not modifiable
[
*N.B. It is possible to set MEM T to a value between 100-3500 ms at steps of 20 ms and 3500-
15000 ms at steps of 50 ms.
**N.B. It is possible to set MEM T1 to a value between 5-100 ms at steps of 1 ms and MEM T2
to avalue between 5-1200 ms at steps of up to 100 ms and 100-1200 at steps of 5 ms.