MLA System USER GUIDE
MLA System User Guide V2.1 309
On clicking ‘OK’ the phase will be inverted and the Polarity button will turn blue;-
Clicking the LED button will illuminate the front grille LED to help identify the DD12 under control in multiple deployment
applications. This can be done individually for any cabinet;-
Or globally using the LED controls at the bottom of the DD12 Overview window;-
Pressing the “play" arrow will make the LEDs of all DD12s illuminate in sequence, cycling round continually until you click on
the stop button Note that the global LED switches will overwrite any LEDs which have been activated on an individual DD12.
The back and forward buttons allow manual cycling of all cabinet LEDs, each click will extinguish the currently
illuminated LED and light the LED on the next or previous DD12.
EQ
The EQ button will open the EQ tab for that particular DD12. The EQ window is virtually identical to all other Vu-Net controlled
devices;-
To Next Page
Loading...
