MLA System USER GUIDE
MLA System User Guide V2.1 335
The outputs can also be selected to be standard balanced analogue or AES3. This is done completely independently of the input,
it is perfectly acceptable to have the inputs and outputs set to different formats, analogue inputs from an analogue console and
AES3 outputs to feed MLA arrays for example.
Note that the input and output names can be changed in the Input and Output tabs, the names will then be shown in the routing
window.
Input Channels
The input and Output channel tabs are very similar to the PEQ window for MLA, MLD and MLA Compact with a few notable
differences;-
To Next Page
Loading...
Need help?
General
