MLA System USER GUIDE
MLA System User Guide V2.1 34
Coming Soon
Replacing a compression Driver
Coming Soon
Replacing a Diaphragm
Coming Soon
Specifications
Acoustical
TYPE Three-way cellular drive, active array element
FREQUENCY RESPONSE (1) 52Hz-18 kHz ± 3dB
MAXIMUM SPL@ 1m LF: 133dB continuous, 139dB peak (3)
MF: 134dB continuous, 140dB peak (4)
HF: 139dB continuous, 145dB peak (4)
Drivers
LF 2 x12"(300mm)/3"(75mm) voice coil, ultra-long excursion, neodymium magnet
drivers, Hybrid® bass horn loaded
MF 2 x 6.5"(165mm)/2"(50mm) coil, neodymium magnet drivers, horn loaded
HF 3 x 1"(25mm) exit neodymium magnet compression drivers, horn loaded
Rated Power (2)
LF 800W AES, 3200W peak
MF 400W AES, 1600W peak
HF 150W AES, 600W peak
Dispersion
(-6dB) 90⁰ horizontal
(-10dB) 120⁰ horizontal
7.5⁰ vertical
Crossover Frequencies
320Hz 8th-order Linkwitz-Riley
4 kHz Vanishing Point™ FIR filters
Audio input
CONNECTORS Female XLR input, male XLR link output
ANALOGUE INPUT IMPEDANCE 20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL 6.15Vrms (+18dBu), over voltage protected
NOMINAL SYSTEM GAIN 28.5dB
AES/EBU IMPEDANCE 110Ohms balanced, Receive and transmit termination
Network
CONNECTORS 2x IP68 rated 8-way, quick-release type
PROTOCOL Unet
Amplifier Module
TYPE Six channel switch mode, fixed frequency
PEAK OUTPUT POWER 4000W
AVERAGE EFFICIENCY 75%
COOLING 4 x temperature controlled internal fans
To Next Page
Loading...
