MLA System USER GUIDE
MLA System User Guide V2.1 314
The zone being adjusted is also displayed on the tab at the bottom of the EQ Window;-
Noise Gate
The DD12 has a noise gate that is applied globally to all DD12’s in the project. This is controlled using the section at the bottom
of the overview window;-
Once enabled the Threshold, Depth and Hold Time can be adjusted, either by manually typing a value or using the up/down
arrows to scroll though values. The default values are Threshold at -67dB, Depth of 10dB and Hold time of 5000ms.
To Next Page
Loading...
Need help?
General
