MLA System USER GUIDE
MLA System User Guide V2.1 312
Parameters can be changed on the properties panel in three ways. The faders can be drag and dropped to a new value, the value
can be scrolled up or down using the up/down buttons to the right of the value windows, and finally values can be directly typed
into the value windows. The response graph will adjust according to the new values and vice versa, adjustments in the graph
window will be reflected in the fader positions and values in the properties panel.
The High pass filter only has a single fader for the corner frequency. This may be adjusted in exactly the same way as the faders
for the PEQ’s. The ‘Type’ drop down offers three types of filter and slopes from 12dB up to 48dB per octave;-
To summarise, there are four ways to adjust filter parameters;-
To Next Page
Loading...
Need help?
General
