MLA System USER GUIDE
MLA System User Guide V2.1 372
It may be that the D2.1 file has more than one optimisation, in which case the Window will appear like his;-
In this case, drag the relevant preset onto just the new array with the replaced module as the previous example.
There are just a couple of further steps before you Synchronise. First, if the system has not had any changes to the User PEQ you
can select the 'Load in Background' option, however it is likely that the system will have had some EQ changes made and in this
instance it is necessary to store the PEQ for the array which is done by returning to the main project page and right-clicking on
the array in the project overview;-
To Next Page
Loading...
