Masimo Root User Manual

Root NIBPT Chapter 3: Operation
www.masimo.com 62 Masimo
Set Mode Description Configuration
Factory
Default
Settings
User Configurable
Settings
Stat
Stat interval
measurement mode will
take blood pressure
measurements
continuously for the
defined duration. See Set
Mode: Stat on page 99.
Stat Duration 10 min 5 min, 10 min
Schedule
Schedule measurement
mode will take blood
pressure measurements
once every defined
interval for the defined
duration. See Set Mode:
Schedule on page 101.
Interval :
Duration
NA
Interval and Duration
settings can be
customized to
accommodate a
facilities protocol.
Note: Schedule mode is
configured in Root by
authorized personnel.
Up to five (5) uniquely
defined Interval :
Duration pairs can be
stored.
Additional Settings for NIBP
From the NIBP screen, touch Additional Settings, and then change the following option:
Options Description
Factory
Default
Settings
User Configurable
Settings
Measurement
Timeout
Defines the value of when the last
BP reading values will clear the
window.
15 min
5, 10, 15, 30, 60 and
90 minutes

Masimo Root Specifications

General

Category	Medical Equipment
Display	10.1 inch touchscreen
Connectivity	WiFi, Bluetooth
Power Supply	AC power
Dimensions	26.8 cm x 22.4 cm x 5.1 cm
Ports	USB, Ethernet
Supported Parameters	SpO2, Pulse Rate
Compatibility	Masimo sensors
Model	Root