112 CONTENTS
• mvExposureAutoAverageGrey
common desired average grey value (in percent) used for Auto Gain Control (AGC) and Auto Exposure Control
(AEC).
• mvExposureAutoAOIMode
common AutoControl AOI used for Auto Gain Control(AGC), Auto Exposure Control(AEC) and Auto White
Balance(AWB).
• mvAcquisitionMemoryMode
MATRIX VISION offers three additional acquisition modes which use the internal memory of the mvBlueC←-
OUGAR-X:
– mvRecord (p. 167)
which is used to store frames in memory.
– mvPlayback (p. 167)
which transfers stored frames.
– mvPretrigger (p. 167)
which stores frames in memory to be transferred after trigger.
To define the number of frames to acquire before the occurrence of an AcquisitionStart or Acquisition←-
Active trigger, you can use mvPretriggerFrameCount.
See also
The use case Recording sequences with pre-trigger (p. 167) shows how this feature works.
• mvAcquisitionMemoryMaxFrameCount
which shows the maximum of frames the internal memory can save.
See also
The use case Working with burst mode buffer (p. 181) lists some maximum frame counts of some
mvBlueCOUGAR-X models.
• mvSmearReduction
smear reduction in triggered and non-overlapped mode.
• mvSmartFrameRecallEnable
which configures the internal memory to store each frame (thats gets transmitted to the host) in full resolution.
MATRIX VISION GmbH
To Next Page
Loading...