124 CONTENTS
SequencerFeatureSelector sequencerFeatureSelector Selects which sequencer features
to control. The feature lists all the
features that can be part of a de-
vice sequencer set. All the device's
sequencer sets have the same fea-
tures. Note that the name used
in the enumeration must match ex-
actly the device's feature name.
SequencerFeature←-
Enable[SequencerFeature←-
Selector]
sequencerFeatureEnable Enables the selected feature and
make it active in all the sequencer
sets.
SequencerSetSelector sequencerSetSelector Selects the sequencer set to which
further settings applies.
SequencerSetSave sequencerSetSave Saves the current device state to
the selected sequencer set se-
lected by SequencerSetSelector.
SequencerSetLoad sequencerSetLoad Loads the sequencer set selected
by SequencerSetSelector in the
device. Even if SequencerMode
is Off, this will change the device
state to the configuration of the se-
lected set.
SequencerSetActive sequencerSetActive Contains the currently active se-
quencer set.
SequencerSetStart sequencerSetStart Sets the initial/start sequencer set,
which is the first set used within a
sequencer.
SequencerPath←-
Selector[SequencerSetSelector]
sequencerPathSelector Selects to which branching path
further path settings apply.
SequencerSetNext sequencerSetNext Select the next sequencer set.
MATRIX VISION GmbH
To Next Page
Loading...