Maxcess D-MAXE - Page 127

TROUBLESHOOTING 10 - 11
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Fehlersuche.fm
Possible causes for faulty
behavior
Remedy Reference
Incorrect results in
displays or with web width
measurements.
The measurement range is not
set or is set incorrectly.
Check the measurement range
of the sensors and/or encoders
you are using.
See item
Menu 1y.5.1.1.3
Dimension, page 7-25
(Sensor)
or item
Menu 1y.5.1.7.2
Dimension, page 7-36
(Encoder) in section 1y.5
Hardware IOs
For further information see the
"Supplementary Operating
Instructions" in the system
documentation.
The length unit is set
incorrectly.
Check the length unit.
see item
Menu 1y.6.5 Length
Unit, page 7-44
in section 1y.6
Control Options