VX30/VX50 Gen3/ECO50 Vacuum Systems Maintenance - 10 Service Hours or Daily 60-13
Water Pump & Blower Oil Level - Check
(1) Water Pump Fill Cap/Dipstick
Fill to dot on oil gauge.
(2) Bl
ower Fill Ports
Fill at breather ports to middle of sight glasses (A). Fill each gear
end separately. Do not fill past middle of sight glass. Watch for
leaks.
WARNING: Never attempt to change or add oil while blower or water pump is running. Personal injury or
equipment failure will result. Allow unit to cool down before attempting any maintenance.
To Next Page
Loading...
