MEDIATEK Ralink MT7620 - Page 263

PGMT7620_V.1.0_040503
Page 263 of 523
MT7620 PROGRAMMING GUIDE
Integrated 802.11n MAC/BBP and 2.4 GHz RF/FEM Router-on-a-Chip
Bits
Type
Name
Description
Initial Value
19
RW
PAE_MIR
PAE to Mirror Port
1’b0: Disable
1’b1: Frame copied to Mirror port
0x0
18:16
RW
PAE_PORT_FW
PAE TO_CPU Forwarding Ports
3’b0xx: System default (disable)
3’b100: System default and CPU port excluded
3’b101: System default and CPU port included
3’b110: CPU port only (As long as the ingress
port is not the CPU port. If the ingress port
is the CPU port, then the system default
and CPU port are excluded.)
3’b111: Frame dropped
0x0
15:12
-
-
Reserved
0x0
11
RW
BPDU_MANG_FR
BPDU as Management Frame
1’b0: Disable
1’b1: Regarded as management frame
0x1
10
RW
BPDU_PAE_FR
BPDU as PAE Frame
1’b0: Disable
1’b1: Regarded as PAE frame
0x0
9
RW
BPDU_FR
BPDU Frame
1’b0: Non-BPDU Frame
1’b1: Regarded as BPDU frame
0x1
8:6
RW
BPDU_EG_TAG
BPDU Egress VLAN Tag Attribution
3’b000: System Default (Disable)
3’b001: Consistent
3’b010, 3’b011: Reserved
3’b100: Untagged
3’b101: Swap
3’b110: Tagged
3’b111: Stack
0x0
5
RW
BPDU_LKY_VLAN
BPDU Leaky VLAN Enable
1’b0: Disable
1’b1: Leaky VLAN enable
0x0
4
RW
BPDU_PRI_HIGH
BPDU Force the Highest Priority
1’b0: System Default
1’b1: Assigned to the highest priority queue
0x1
19
RW
BPDU_MIR
BPDU to Mirror Port
1’b0: Disable
1’b1: Frame copied to Mirror port
0x0