Mercury 45 Jet 50-55 - Fuel Pump Reassembly; Check Valve Assembly; Fuel Pump Assembly

FUEL SYSTEMS - 3B-990-817643R1 DECEMBER 1996
Fuel Pump Reassembly
Check Valve Assembly
1. Insert retainer (a) thru plastic disc (b) and rubber check
valve (c).
23601
b
c
a
2. Install check valves and retainers into fuel pump body.
23601
3. With retainer installed in pump body, break retainer
rod (a) from retainer (b) by bending sideways.
4. Reinstall rod (a) into retainer cap (b) and, use a small
hammer or hammer and punch to tap rod down into re-
tainer until flush with top of retainer.
23601
a
b
23610
b
a
Fuel Pump Assembly
1. Assemble remaining components as shown in “Fuel
Pump Exploded View”.
2. Install bolts (a) and torque to 40 lb. in. (4.5 N·m).
51267
a
a